WinPE 11-10-8 Sergei Strelec - загрузочный диск на базе Windows 11-10-8 PE - для обслуживания компьютеров, работы с жесткими дисками и разделами, резервного копирования и восстановления дисков и разделов, диагностики компьютера, восстановления данных, антивирусной профилактики и установки ОС Windows. Удачной работы!
Состав сборки: WinPE11x64 WinPE10x64 WinPE10x86 WinPE8x86 WinPE8x86(Native)
Backup and restore Acronis Cyber Protect Home Office Build 40278 Acronis True Image 2019 Build 17750 Acronis True Image 2014 Build 6673 Acronis Backup Advanced 11.7.50230 EaseUS Todo Backup 2023 Build 20230222 Active Disk Image 10.0 StorageCraft Recovery Environment 5.2.5.37836 R-Drive Image 7.1 Build 7104 Veritas System Recovery 22.0.0.62226 Symantec Ghost 12.0.0.11531 TeraByte Image for Windows 3.56 AOMEI Backupper 7.2.0 Drive SnapShot 1.50.0.1094 Macrium Reflect 7.2.4942 Disk2vhd 2.02
Hard disk Disk Management, System Acronis Disk Director 12.5 Build 163 EASEUS Partition Master 16.5 Paragon Hard Disk Manager 15 10.1.25.1137 MiniTool Partition Wizard 12.7 AOMEI Partition Assistant 9.15 AOMEI Dynamic Disk Manager 1.2.0 NIUBI Partition Editor 9.3.9 DiskGenius 5.4.6.1441 Active Partition Manager 6.3.05 Defraggler 2.22.995 O&O Defrag 23.0 HDD Low Level Format Tool 4.40 Active KillDisk 14.0.27 Active Disk Editor 7.3.01 Diskpart GUI Micro 2.0
Diagnostics HD Tune 5.75 Check Disk GUI Victoria 5.37 HDD Regenerator 2011 Hard Disk Sentinel 6.10 CrystalDiskInfo 8.17.14 CrystalDiskMark 8.0.4c AIDA64 Extreme 6.85.6300 BurnInTest 8.1 Build 1025 PerformanceTest 10.2 Build 1002 RWEverything 1.7 CPU-Z 2.03.1 HWiNFO32 7.40 PassMark MonitorTest 4.0 Build 1001 OCCT 9.1.3 Keyboard Test Utility 1.4.0 HDD Regenerator 2011 IsMyLcdOK 5.32 Drevitalize 4.10 Linpack Xtreme 1.1.5 LinX 0.6.5
Backup and restore Acronis Cyber Protect Home Office Build 40278 Acronis True Image 2019 Build 17750 Acronis True Image 2014 Build 6673 Acronis Cyber Protect 15.0.27009 EaseUS Todo Backup 2023 Build 20230222 Active Disk Image 11.0.0 StorageCraft Recovery Environment 5.2.5.37836 R-Drive Image 7.1 Build 7104 Veritas System Recovery 22.0.0.62226 Symantec Ghost 12.0.0.11531 TeraByte Image for Windows 3.56 AOMEI Backupper 7.2.0 Drive SnapShot 1.50.0.1094 Macrium Reflect 8.1.7401 Disk2vhd 2.02
Hard disk Disk Management, System Acronis Disk Director 12.5 Build 163 EaseUS Partition Master 17.6.0 Build 20230206 Paragon Hard Disk Manager 15 10.1.25.1137 MiniTool Partition Wizard 12.7 AOMEI Partition Assistant 9.15 AOMEI Dynamic Disk Manager 1.2.0 NIUBI Partition Editor 9.3.9 DiskGenius 5.4.6.1441 Active Partition Manager 6.3.05 Defraggler 2.22.995 O&O Defrag 23.0 HDD Low Level Format Tool 4.40 Active KillDisk 14.0.27 Active Disk Editor 7.3.01 Diskpart GUI Micro 2.0
Diagnostics HD Tune 5.75 Check Disk GUI Victoria 5.37 Hard Disk Sentinel 6.10 CrystalDiskInfo 8.17.14 CrystalDiskMark 8.0.4c AIDA64 Extreme 6.85.6300 BurnInTest 8.1 Build 1025 PerformanceTest 10.2 Build 1002 CPU-Z 2.03.1 HWiNFO64 7.40 PassMark MonitorTest 4.0 Build 1001 OCCT 10.0.5 Keyboard Test Utility 1.4.0 HDD Regenerator 2011 IsMyLcdOK 5.32 Drevitalize 4.10 Linpack Xtreme 1.1.5 LinX 0.6.5
HDD Regenerator 2011 HDDaRTs 17.01.2023 (author program Ander_73) BIBM++ 02.11.2022 (author program Ander_73) HDD Regenerator 2011 MHDD 4.6 Victoria 3.52 Memtest86+ 6.10 HDAT2 7.5 GoIdMemory PRO 7.85 Active Password Changer Professional 5.0 Ghost 11.5 BootIt Bare Metal 1.84 Eassos PartitionGuru Kon-Boot for Windows 2.5.0 Hard Disk Sentinel for DOS 1.21 DRevitalize 3.32 CHZ Monitor Test 2.0
SmartFix Tool Official website https://smartfix.pro/en/ To update the program, download from the official site and replace in the folder SSTR/MInst/Portable/Antivirus You can also upgrade from WinPE if you have an Internet connection.
Kaspersky Rescue Disk 2018 - Download from the official site and unzip the ISO image to a folder Linux/krd2018 оn the USB Drive. Kaspersky Rescue Disk 2018 http://rescuedisk.kaspersky-labs.com/updatable/2018/krd.iso
Dr.Web LiveDisk - Download ISO image from the official site and unpack to a folder on a USB flash drive Linux/DrWeb. Dr.Web LiveDisk http://download.geo.drweb.com/pub/drweb/livedisk/drweb-livedisk-900-cd.iso
In the folder SSTR/MInst/Portable/Antivirus instead Dr.Web CureIt! and Kaspersky Virus Removal Tool pacifiers. Need to download the latest version and replace the pacifiers.
Actual version is always available for download here: Dr.Web CureIt! http://download.geo.drweb.com/pub/drweb/cureit/cureit.exe Kaspersky Virus Removal Tool http://devbuilds.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe
Acronis True Image 2021 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2021
Acronis True Image 2020 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2020
Acronis True Image 2019 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2019
Acronis True Image 2018 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2018
Acronis Disk Director 12 Unpack the ISO image into a folder on the USB flash drive Linux/ADD12
Kaspersky Rescue Disk 2018 Download ISO image from the official site http://rescuedisk.kaspersky-labs.com/updatable/2018/krd.iso and unpack the image to the Linux/krd2018 folder on the USB flash drive.
Parted Magic 2020 ISO image rename in pmagic.iso and copy the folder Linux/pmagic
Ubuntu Desktop amd64 Unpack the ISO image into a folder on the USB flash drive Linux/ubuntu
Kali Linux 2019 Unpack the ISO image into a folder on the USB flash drive Linux/kalilinux2019
Clonezilla Download ISO image from official site, rename it to clonezilla.iso and copy ISO image to folder Linux/clonezilla32 or Linux/clonezilla64 according to the size of the image.
TeraByte Image for Linux Unpack the ISO image, respectively, the bit depth in the folder on the USB flash drive Linux/TeraByteImageLinux32 or Linux/TeraByteImageLinux64
Dr.Web LiveDisk Download ISO image from the official site http://download.geo.drweb.com/pub/drweb/livedisk/drweb-livedisk-900-cd.iso and unpack to a folder on a USB flash drive Linux/DrWeb.
Supported methods and protocols: TCP/IP, NetBIOS, PPPoE, and WLAN (Wi-Fi), WebDAV. If you want use Wi-Fi - you need to install "wireless network-adapter driver". Choose "Drivers" section in the "Start Menu". Connecting to Wi-Fi require to use "PE Network Manger", click on tab "Wi-Fi" on it.
To import WLAN profiles on your computer or client computer, export the WLAN profile (s) (you can immediately go to the SSTRWLANProfile folder) program Marat Galiullina Smart WiFi Solution (available in the archive) Or by means of Windows (Command line launch - PCM - On behalf of the administrator.)
WLAN profiles put in a folder on your USB flash drive SSTRWLANProfile The number of profiles does not matter. After loading WinPE, WLAN drivers will be installed and WLAN profiles imported. You will only need to select the necessary network in the PENetwork program, and click - Connect You can also import manually after downloading, from the shortcut on the Desktop, or the Start menu, after installing the Wlan driver.
Features of connecting network drives in WinPE 10. If you connect a network drive, in the Username field, should be indicated in the format of "computer nameuser name" or "IP address computeruser name"
Example: STRELEC-PCSEREGA or 192.168.0.150SEREGA Also, if the automounter.
Example: net use Z: STRELEC-PCJ /USER:STRELEC-PCSEREGA 123456 or net use Z: 192.168.0.150J /USER:192.168.0.150SEREGA 123456
In EFI mode, the default Microsoft standard EFI boot loader is used.
To expand functionality when booting in UEFI mode, you can switch to the GRUB2 bootloader. However, booting with Secure Boot enabled on all computers is not guaranteed. So it's better to turn it off When booting from GRUB2, there are memory checking utilities and you can also add various Linux images.
Switch between EFI loaders Microsoft or GRUB2, you need to run the batch file on a flash drive in the EFI/boot folder _MICROSOFT_EFI.bat - switches to the Microsoft bootloader _GRUB2_EFI.bat - switches to GRUB2 bootloader
You can always see which boot loader is active by file in the EFI/boot folder [MICROSOFT_MODE] - Microsoft loaders are active [GRUB2_MODE] - GRUB2 boot loaders are active
No problem! To boot quickly from your computer hard drive:
Download WinPE ISO Image Extract the SSTR folder from the ISO image to the root of any disk / partition, it is better, of course, not the system one. Run the file in the SSTR folder
Boot_x64_WinPE.cmd - for loading WinPE x64 (run as Administrator) or Boot_x86_WinPE.cmd - for loading WinPE x86 (run as Administrator)
The computer will automatically reboot to WinPE. After rebooting from WinPE, the computer will boot normally
After normal PC boot, remove WinPE boot entry from BCD by running the file BCD_recovery.cmd (run as Administrator) or manually uninstall with BOOTICE
Possible applications: For example, remote support. The client only needs to download the image, extract the SSTR folder and start the batch file. And you already have to remotely connect to the PC.
For beginners: if you are reinstalling Windows, you do not need to do anything with the BCD. It's already new there.
This method is designed to install controller drivers if WinPE does not have the necessary WLAN drivers, network drivers, etc. Note: This method is not intended for installing volumetric drivers, video, etc. Drivers must be unpacked, i.e. * .sys driver, * .cat security directory, and * .inf file In order for your drivers to install when WinPE10 boots up, place them on your bootable USB flash drive in the SSTR/USER/MY_DRIVERS_x64 or SSTR/USER/MY_DRIVERS_x86 folders. They will be installed automatically. Subfolders are allowed. In order for your drivers to install when WinPE8 boots up, place them on your bootable USB flash drive in the SSTR/USER/MY_DRIVERS_x86_WinPE8 folder Subfolders are not allowed.
If you want to change the image of the desktop, you must put your picture in the SSTRMInstWallpaper folder to replace the existing Wallpaper.jpg under the same name (that is, replace its)
1.Program 78Setup. Full description of the program on author page conty9 For this folder SSTR/_WIN, in the appropriate subfolder you need to put install.wim or install.esd. After starting the program you will see a list of available Windows versions to install, and click Start Also in the root folder _WIN possible to put ISO images of Windows The choice will be available in the box below _WIN Folder can be placed anywhere, even in the other root of the drive or partition. 2. Program WinNTSetup (author program JFX)
This is a special mode in which the first load specially prepared minimal kernel (without GUI) and works off a script that searches for media (DVD, USB-HDD) with an assembly and installs the "full" kernel.
+ Pros:
1. Fast loading on USB 1.x. Instead of conventional 5-10 min USB 1.2 - about 1 minute. 2. Less memory consumption (for Strelec assembly - less on ~ 250Mb). 3. Reduced CPU requirements (Native Mode kernel patched to work with the CPU starting from P4 / Athlon), scanning is disabled NX-Bit.
-Minuses:
1. Binding to the carrier (if extraction - PC "hangs"). 2. Slower core work (because everything is loaded not from the fast RAM-disk, and c is a slow media). In practice, special "brake" is not felt. 3. For compatibility with older CPU is disabled and multi-core support PAE.
Note: On modern PC is better to use normal startup.
On it is searched and launched (if found) windowssystem32bootwinload.exe. The option is not a panacea for the treatment ... but it will help to load the Windows if the MBR/PBR entries are damaged, the bootmgr bootloader on the HDD, its BCD menu, other files from the boot partition, or the problem with the partition itself. After the OS is booted (it can boot up unactivated - this is normal, depends on the activation method), it will only be necessary to restore the boot files (if they were, of course, damaged) by regular or third-party utilities. Without special need, this method is not recommended.
All the recommended recording methods are in the archive in the folder - Burn to the USB flash drive The ISO image is also perfectly bootable from a bootable flash drive created by Ventoy Official website If you are writing other programs, such as WinSetupFromUSB, then please do not write that there are no programs or that it does not work. Learn the method of recording a particular program, I do not want to do it, because there are a lot of them.
There are NO viruses in the assembly. There are SFX archives, which contain programs, compiled batch files, specific programs for PC maintenance, etc., to which different antiviruses react in different ways. If your antivirus detects a virus, and you trust it, or panic, the advice is standard, DO NOT USE MY ASSEMBLY. Make a conscious choice. The assembly is made mainly for people involved in PC maintenance, that is, for those who are in the subject. These people understand all the specifics of PC maintenance programs, the specifics of the WinPE assembly and its structure, and, accordingly, the reaction of antiviruses.
System requirements: 1. RAM 2 GB / Native 512 MB 2. PC with the ability to boot from CD/DVD-drive or USB.
Информация о программе: Год выпуска: 2023 Платформа: (x86/x64) Язык интерфейса: Английский / English Лекарство: Не требуется Размер файла: 4.73 GB
Скачать WinPE 11-10-8 Sergei Strelec 2023.03.21 English version
Уважаемый посетитель, Вы зашли на сайт как незарегистрированный пользователь. Мы рекомендуем Вам зарегистрироваться либо войти на сайт под своим именем.
Комментарии (0)
